User Manual

www.pro-team.com 866.888.2168 22
Wire Harness
WIRE HARNESS REPLACEMENT (CONTINUED FROM PAGE 21)
Put the hose sleeve into the other end of the hose
and position in the base assembly. Replace the
cover, air duct, and screw.
26.
Thread the air duct hose into the motor housing,
turning counter clockwise.
25.
Remove screw that holds the cover and air duct.
24.
Connect wires as shown and verify orientation of
switches.
27.
BLACK
WHITE
RED
BLUE
(Continued on page 23)