User Manual

www.pro-team.com 866.888.2168 18
Wire Harness
WIRE HARNESS REPLACEMENT (CONTINUED FROM PAGE 17)
(Continued on page 19)
Cut lower wire harness between the motor housing
and the base assembly. Pull the air duct system,
air duct hose and lower wire harness out of the
motor housing.
10.
Remove (2) lower air duct screws from inside
motor housing then remove the foam that covers
wire harness.
9.
Note: Rotate brass fitting so it cannot be trapped
by the lower duct.
Insert new power nozzle wire harness in
motor housing, locking brass fitting into
position as shown.
11.