Instructions / Assembly

9 www.pro-team.com 866.888.2168

ASSEMBLY

(a) Feed bag switch wires through bag housing.

(b) Align duct with opening in bag housing

(APPLIES TO XP MODELS ONLY).

onto bulkhead.

(d) Insert bag housing screws and tighten.

(e) Attach harness connectors to switch and place

switch into position.

(f) Fasten switch cover with screw.

(g) If replacing the bag housing seal, do not let the

seal cover the lockout switch cover opening.

NOTE: Make sure the handle nut plate is in place before

you replace the bag housing gasket seal.

Switch Cover

Phillips Screw

Bag Housing

Gasket Seal

Filter Lock-Out

Switch Cover

Filter Lock-Out

Switch

(a)

Bag Housing

Assembly

Left/Right Wand Guide or

(both) Duct Assembly

APPLIES TO

XP MODELS ONLY

Motor Housing

Bag Housing Cover

Handle Nut Plate

(f)

(c)

(d)

(b)

Bag Housing to Motor Housing

(e)