Operation Manual

Error! Internal timer has a defect
Error! Ventilator in bottom tray has a defect
Error! Communication fault between control and switch parts
To be able to read the hour counter for the lights, press the the “confi g” and “increase
volume” simultaneously for 3
seconds and keep them pressed.
Time indication x 10 = burning hours for the lamps
E.g.:
a. 5 = 5 x 10 = 50 burning hours
b. 50 = 50 x 10 = 500 burning hours
The hour counter is reset to 0 hours by simultaneously pressing the “confi g” “Xsens” and
the “increase body cooling” buttons for 5 seconds.
The hour counter of the sun bed indicates the number of hours the sun bed has been run-
ning, including the ventilation time.
The hour counter is read by simultaneously pressing the “confi g” and the “decrease vol-
ume” buttons for 3 seconds and keeping them pressed.
Time indication x 10 = sun bed hours
E.g.:
a. 5 = 5 x 10 = 50 sun bed hours
b. 50 = 50 x 10 = 500 sun bed hours
Error messages:
! If one of the above error messages appears on the display, you must stop us-
ing the sun bed and take the plug out of the socket. Please contact your dealer.
!
Config. Increase volume
+
A
Config. Decrease volume
+
B
+
+
20