Operation Manual

(optional) The “air conditioning” button is used to switch the airco on and off.
It will be turned on by default at the start of each tanning session.
Note:
A. The air conditioning can be switched off by pressing the button for at least 2 seconds.
B. Once the air conditioning has been switched off, it must cool down for 3 minutes
before it can be switched on again.
If the “air conditioning” button is pressed during cool-down, the display will show the
remaining cooling down time.
(optional) The “Xsens” button switches the Xsens scent on and off. It will be switched on
by default at the start of each tanning session.
The “face tanners max” button is used to switch both the outside two as the centre face
tanner(s) to their maximum setting.
The “face tanners min” button is used to switch both the outside two as the centre face
tanner(s) to their minimum setting.
Setting 1: All face tanners on minimum setting
Setting 2: Centre face tanner(s) on maximum, outside face tanners on minimum setting
Setting 3: All face tanners on maximum setting
Please Note:
A. The face tanners are switched off by pressing the “face tanner min” button for 5
seconds.
B. When the tanning session starts face tanning setting 1 will be active.
C. These buttons are only present on an SLi sun bed.
Use the “extra face tanning” buttons to switch the SPr lamps above the face on and off.
The “extra body tanning” button is used to switch the small SPr lamps above the body on
and off.
Note:
A. For extra face and body tanning there is no cooling down period after switching on and off.
B. When the tanning session starts the extra face and body tanning will be active.
C. These buttons are only present on an SPr sun bed.
The “increase face cooling” button increases the face cooling.
The “decrease face cooling” button decreases the face cooling.
The face cooling can be set to 4 different levels.
The “increase body cooling” button is used to increase the body cooling.
The “decrease body cooling” button is used to decrease the body cooling.
The body cooling can be set to 4 different levels.
D
Air conditioning
Xsens
E
F
FT maximum FT minimum
G
Extra face tanning
H
I
Extra body tanning
Increase face cooling
Decrease face cooling
Increase body cooling
Decrease body cooling
J
K
L
M
19