Operation Manual

Preventive Maintenance
12
Frequency: Afther each
session
Daily Weekly Monthly Every 1200
hr.of use
Clean Acrylic's
***
Inspect Facial
glass if appli-
cable
*
Clean and
Sanitize
goggles
*
Clean and
sanitize bed
exterior
*
Remove and
clean the in-
side acrylic's
*
Wipe and
vacuum fan's,
vents and
venthoses
*
Clean all
refl ectors
*
Inspect
Acrylic's for
crack wear
*
Replace the
acrylic's
*
Adjust gas-
schock or
spring's ten-
sion if needed
*
Check combi
set bolts for
proper tight-
ness
*
Inspect vent
hoses for op-
timum cooling
*
* Please Refer to the Lamp Manufacturer Specifi cations for Lamp and Facial Bulb Replacement and Frequency.
When replacing Facial Bulbs ensure that any fi ngerprints on the bulb itself are wiped clean using the cleaning
pad provided with replacement bulbs or alcohol.
ProSun recommends the use of Lucasol or Solacryl when cleaning acrylic sheets
* Certifi ed by: International Smart Tan Network.
For information about becoming a certifi ed member, call or write to: International Smart Tan Network, 3101
Page Avenue, Jackson, MI 49203, [phone]
The acrylic sheets used in this machine should be changed between 1200 and 1500 hours of operation. If not,
UV-transmission could be greatly reduced.