Operation Manual

The front of the Sunshower is the only part that can be cleaned by the users: this includes the decorative
frame (A), the coated glass (B) and the operating panel (C).
Cleaning advice for the coated glass
The glass plate (B) is treated with a special coating to reduce the risk of scale. Coated glass is a material
that is not as prone to scratching as plastic, but it can nevertheless be scratched easily. Consequently,
“treating” the glass well, which includes cleaning, is important. Dirt and spots can be best removed by
using a small quantity of ProSun Sunshower Glass Cleaner (R) and the ProSun Sunshower Pad provided
(Q). Use a rubber wiper to wipe the wet surface dry. Then rub the surface with a slightly moist terry cloth
or a squeezed out chamois. The surface then dries evenly. To restore the coating, use ProSun Sunshower
After Care (S). Under no circumstances use glass cleaner or “multi-purpose cleaner“: as this often crea-
tes “dry spots” and/or leaves behind deposits.
How do I order a new cleaning pack?
If you want to order a new cleaning pack, go to
www.prosunsunshower.com for more information.
Cleaning advice for the decorative frame
Remove with a moist cloth/sponge, which you also use to clean the windows. Possibly add non-caustic
pH neutral cleaning agent dessolved in lukewarm, clean water. Again remove with a moist cloth. Dry with
a clean dry cloth. For very dirty spots, use pure cleaning agent. Remove again with a clean, moist cloth
and dry with a clean dry cloth.
Replacing the lamps
Cleaning and maintenance of the ProSun Sunshower
Page 11