Operation Manual

CARE AND MAINTENANCE

The Care and Maintenance in this section covers most of the difficulties that you may

encounter under normal working circumstances. If your tanning bed fails to operate

properly, please review the following steps before calling for service.

THE TANNING BED YOU PURCHASED CONTAINS VOLTAGES WHICH ARE

POTENTIALLY HAZARDOUS. ALL REPAIRS AND GENERAL MAINTENANCE

SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL.

FOR YOUR TANNING BED:

Safe and continuous operation of your tanning bed depends partially on the care taken by

users. Please observe the following precautions when tanning bed is in use.

x Do not disassemble any part of the bed while in use.

x Do not allow sharp objects in the bed while in use.

x Do not allow liquid or any foreign objects to get inside the bed.

x Ensure the beds back side is at least 12 inches away from the wall.

x Avoid from having the acrylic sheets come in contact with sharp edges and objects

x Insure that the main exhaust hoses are never kinked and keep them free of debris.

x The room or cabin in which the unit is operated must be well ventilated.

x Make sure that the unit never comes in contact with water while connected to power.

x Do not turn the machine on and off frequently within the space of 3 minutes.

7/22/02