Operation Manual

REVISED ON: 11/20/01 page 5
ELECTRICAL REQUIREMENTS
IMPORTANT NOTICE
Please read carefully the following information.
The electrical requirements for your new tanning bed:
Model of
Tanning Bed
Circuit breaker
Required
(Volts / Amps)
Hertz Continuous Operating Amps
3090 220V / 30 60 25
3002 220V / 30 60 25
3000 220V / 30 60 22
2870 XL 220V / 30 60 24
2801 XL 220V / 50 60 24
2800 Dual 220V / 30 60 23
2800 Select 220V / 30 60 23
2601 220V / 30 60 23
2650 220V / 30 60 18
2401 220V / 30 60 18
2400 Dual 220V / 30 60 18
Operating any 220 Volt combination at voltage levels below 210 or above 230 constitutes
an automatic nullification of the warranty, as it could cause damage to the unit’s system.
Please insure that your electrician and/or installer reads this users manual carefully prior
to the installation of your tanning bed.
Always disconnect the unit from its power supply when
servicing or repairing the unit.