Operation Manual

REVISED: 11/20/01
12
PREVENTIVE MAINTENANCE
Frequency
Clean
Acrylic
Top &
Bottom
Clean
Pillow
Inspect
Facial
Glass
If
applicable
Clean &
Sanitize
Goggles
Ensure
Click
Strips is
firmly in
place
Clean and
Sanitize
Bed
Exterior
Remove
& Clean
the inside
both
Acrylic
sheets
Dust
Lamps
Wipe and
Vacuum
fans &
vents
Clean all
Reflectors
Wipe and
Vacuum
out Vent
Hoses
Inspect
Acrylic
for cracks
wear
Replace
Top and
Bottom
Acrylic
Adjust
shock
tension (if
needed)
Check
combi set
bolts for
proper
tightness
Inspect
Vent
Hoses for
Optimum
Vent-
illation
After Each
Session
* * * * *
Daily
* * * * •
Weekly
* * * * * * • •
Monthly
* * * •
Every 1200
hrs. Of use
•
* Please Refer to the Lamp Manufacturer Specifications for Lamp and Facial Lamp Replacement and Frequency.
When replacing Facial Lamps ensure that any fingerprints on the lamp itself are wiped clean using the cleaning pad provided with replacement lamps or alcohol.
PROSUN® recommends the use of Lucasol or Solacryl when cleaning acrylic sheets
* Certified by: International Smart Tan Network.
For information about becoming a certified member, call or write to: International Smart Tan Network, 3101 Page Avenue, Jackson, MI 49203, [phone]
The acrylic sheets used in this machine should be changed between 1200 and 1500 hours of operation. If not, UV-transmission could be greatly reduced.
PROSUN® recommends the use of Lucasol or Solacryl when cleaning acrylic sheets