User manual

ES
ES-8
6.2 Set Camera State and Photo Resolution
To set the number of pictures or movie the camera will take per PIR triggering, the user can
choose 1P, 3P or movie mode.
a) Turn on the unit and press the “SETUP” button
b) The menu icon will start to blink, press the “UP” or “DOWN” button till icon 4,5 is blinking,
press “OK” to enter.
c) Press the “UP” or “DOWN” button to select picture or movie.
d) If selecting the “Picture” mode, press “OK”, the LCD will display “1P” (shot 1 photo a time) or
“3P” (shot 3 photos a time), press “UP” or “DOWN” to select and press “OK” to confirm.
e) Then the LCD will display “LoHi” which comes to setting the image resolution. “Lo”
represents 0.8MP and “Hi” represents is 2.0MP. Press “UP” or “DOWN” to select and press
“OK” to confirm. Default is “Hi”.
Model
Lo
Hi
ProStalk
1028*768 (0.8M)
1600 x 1200 (2.0M)
f) If selecting the “Movie” mode, press “OK” to confirm.
▲ The movie length is default set by 15 seconds.
g) Then it comes to the next setting item. If the setting is done, press “SETUP” to save and exit
the setting.
6.3 Set Date, Year and Time
Setting the Date, Year and Time to make them stamp on the picture.
1) Set Date
a) Turn on the unit and press the “SETUP” button
b) The menu icon will start to blink, press the “UP” or “DOWN” button until icon 1“DATE” is
blinking, press “OK” to enter.
c) Then the LCD first two digits represents month (MM) and last two digits represent day
(DD).
d) Press “UP” or “DOWN” to select month between 01-12, Press “OK” to confirm. Then it
comes to day setting.
e) Press “UP” or “DOWN” to select month between 01-31, Press “OK” to confirm. Then it
comes to year setting.
f) Press “UP” or “DOWN” to select year between 00-99 (2000-2099), Press “OK” to confirm.
g) If the setting is done, press “SETUP” to save and exit the setting.