User's Manual

Page 2
Table of Contents
1 Introduction 4
1.1 WAHryTone Features 4
1.2 The Prostage System 4
2 Terminology 5
2.1 MIDI - WTF Is That??? 5
2.2 Expression Pedal 5
2.3 Instant Access = On/Off Switches (Stompbox Mode) 5
2.4 Preset | Program Change 5
2.5 Control Change | CC = > Real-time Control With an Expression Pedal (e.g. Volume) 5
2.6 Hard-Bypass | Buffered-Bypass 5
3 Connecting the WAHryTone 6
3.1 The Front Panel 6
3.2 The Rear Panel 6
3.3 Avoiding Hum Problems 7
3.4 The expression pedal connection 7
3.4.1 Expression Pedal Without Switch 7
3.4.2 Expression Pedal With Switch 7
3.4.3 Calibration of the Expression Pedal 7
4 Using the WAHryTone 8
4.1 What Exactly is the Prostage WAHryTone? 8
4.2 Basic Functions of the WAHryTone 8
4.3 Switching the Effect On and Off 9
4.4 The Preset Number 128 9
5 Creating Presets with the Prostage App 10
5.1 Connect the App to the Device | Pairing Code 10
5.2 Selecting Presets 10
5.3 Adjusting and Saving Sounds | Presets 11
5.4 Delete Sounds | Presets 11
5.5 Changing the Basic Settings 11
5.6 Error Messages 11
6 Creating Presets Using the Prostage System Manager Software 12
6.1 Connecting the WAHryTone to the XDS | XLS | XTMpro 12
6.2 Reading the Settings of the WAHryTone 13
6.3 Recalling Presets 13
6.4 Adjusting Parameters and Store Presets in the WAHryTone 14
6.5 Rename or Delete a Presets 14
6.6 Saving the Settings to the Local Hard Disk 14
6.7 Reading the Settings from Local Hard Disk 14
7 Creating Presets with MIDI Commands | Sequencer Software 15
7.1 Controling the Parameters using Control Change Commands 15
7.2 Saving Presets and Changing the Basic Settings using Sysex Commands 16