Technical Specifications

Moisture Barrier
1. PRODUCT NAME
ProSpec
®
Moisture Barrier
2. MANUFACTURER
Akona
®
Manufacturing, LLC, a TCC Materials
®
company
(Akona
®
Manufacturing is a licensed manufacturer of ProSpec
®
)
2025 Centre Pointe Blvd, Suite 300
Mendota Heights, MN 55120 USA
Phone: [phone]
Fax: [phone]
Internet: tccmaterials.com
3. PRODUCT DESCRIPTION
ProSpec
®
Moisture Barrier is an advanced latex polymer-based
technology used as a water-resistant membrane applied to all
wood or moisture-sensitive backup walls prior to application of
ProSpec
®
Polymer-Modified Stone Veneer Base Coat. Part of
the ProSpec
®
veneer stone installation system.
Features and Benefits
 Flexible with exceptional elongation
• Water-resistant
 Solvent free and VOC compliant
• Interior and exterior
• Horizontal and vertical applications
• Will not support mold growth
 Ready to use - no mixing required
 Exceeds ANSI A118.10
Uses
 Above and below grade walls or floors
 Interior and exterior
Recommended Substrates
 Concrete *
 Concrete Masonry Unit (CMU) *
 Brick masonry *
 Cement Backer Unit (CBU) **
• Exterior grade plywood ***
 Plaster ****
• Gypsum wall board ****
* Suitable as a load bearing substrate for installation of direct
adhered stone veneer applications when fully cured.
** Suitable as a substrate that supports its own weight for
installation of direct adhered stone veneer applications when
verified by CBU manufacturer for exterior use and specific
installation instructions are provided.
*** Suitable as a substrate when verified for exterior use by
manufacturer and proper preparation methods are followed.
**** Interior dry areas only.
SAFETY
READ THE SAFETY DATA SHEET (SDS) BEFORE USING THIS
PRODUCT. SDS information is available on our website:
tccmaterials.com or contact TCC Materials
®
at
651-688-9116 (7:30 AM to 4:00 PM, M-F, Central US Time).
CAUTIONS
Read complete cautionary information printed on product
container prior to use.
This Product Data Sheet has been prepared in good faith on the
basis of information available at the time of publication. It is
intended to provide users with information about and guidelines
for the proper use and application of the covered ProSpec
®
brand product(s) under normal environmental and working
conditions. Because each project is different, neither ProSpec
®
nor TCC Materials
®
can be responsible for the consequences of
variations in such conditions, or for unforeseen conditions.
4. TECHNICAL DATA
Data Sheets are subject to change without notice. For the latest version, check our website at www.tccmaterials.com
1
Time
Typical
Values
ANSI
A118.10
Shear Strength
12
weeks
dry
200 psi
(1.4 MPa)
>50 psi
(0.3 MPa)
Water Immersion
100
days
150 psi
(1.0 MPa)
>150 psi
(1.0 MPa)
Fungus & Micro
Organism
Resistance
n/a Passes
Breaking Strength n/a
400 psi
(2.8 MPa)
Min. 170 psi
(1.2 MPa)
Waterproofness n/a Passes