SDS

Safety Data Sheet
ProSpec
®
Stone Veneer Sealant
© TCC Materials
Version 1.0
Page 9 of 15
Odour threshold: No applicable information available.
Colour: (Brown, Gray, Tan, or Off-White)
pH value: No applicable information available.
Melting point: No applicable information available.
Boiling point: No applicable information available.
Sublimation point: No applicable information available.
Flash point: Non-flammable.
Flammability: not flammable (UN Test N.1 (ready combustible solids))
Lower explosion limit: No applicable information available.
Upper explosion limit: No applicable information available.
Autoignition: No applicable information available.
Vapour pressure: No applicable information available.
Density: 10.1 lb/USg (77°F / 25 °C)
Relative density: No applicable information available.
Vapour density: No applicable information available.
Partitioning coefficient noctanol/
water (log Pow): No applicable information available.
Self-ignition
temperature: not self-igniting
Thermal decomposition: No decomposition if stored and handled as
prescribed/indicated.
Viscosity, dynamic: No applicable information available.
Viscosity, kinematic: No applicable information available.
Solubility in water: (59°F / 15 °C) insoluble
Miscibility with water: (59°F / 15 °C) not (e.g. <10%)
Solubility (quantitative): No applicable information available.
Solubility (qualitative): No applicable information available.
Evaporation rate: No applicable information available.
Other Information: If necessary, information on other physical and chemical
parameters is indicated in this section.
Section 10: Stability and Reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Oxidizing properties:
Not an oxidizer.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
The product is stable if stored and handled as prescribed/indicated.