SDS

Safety Data Sheet
ProSpec
®
Polymer-Modified Stone Veneer
Base Coat
© TCC Materials
Version 1.0
Page 1 of 7
AKONA MANUFACTURING LLC Emergency Telephone Number: Revision Date
A TCC Materials Company 651-688-9116 January 2016
2025 Centre Pointe Boulevard, Suite 300 Information Telephone Number
Mendota Heights, MN 55120-1221 651-905-8137
Section 1: Product Identification
Product Type: Dry Packaged Cement-Based Products
Product Name:
ProSpec
®
Polymer-Modified Stone Veneer Base Coat
Section 2: Hazard Identification
The most immediate and likely hazards are burns from dust in the eye. When the
product is mixed with water, it will form an alkaline solution, which can cause skin
irritation. Dust from the product is irritating to breathe. Prolonged overexposure to dust
from the product is harmful to breathe, because it will contain crystalline silica.
Applicable hazard statement based on cement content
Danger.
H318: Causes serious eye damage
H315: Causes skin irritation
Applicable hazard statement based on crystalline silica content
Danger.
H350: May cause cancer from inhaling dust.
H372: Causes damage to respiratory system (silicosis) through
prolonged or repeated exposure to inhaled dust.
This product has been evaluated according to GHS and
29CFR1910.1200, Appendix A. It is categorized as a Health Hazard Carcinogen
Category 1A, because it contains crystalline silica (quartz). It is categorized as a Health
Hazard (serious eye damage/eye irritation - Category 1 and skin irritation – Category 2)
because it contains Portland cement.
Applicable Precautionary Statements:
Based on crystalline silica content.
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P260: Do not breathe dusts.
P270: Do not eat, drink or smoke when using this product.
P280: Wear eye protection.
P308+313/314. If exposed or concerns, or if you feel unwell: Get medical advice.
P501: Dispose of contents in accord with local regulations.