Users Manual Part 2

2-3 Bluetooth Settings
Press SEL knob at BLUETOOTH being highlighted
to enter Bluetooth Settings. Turn VOL knob to
select sub-features, then turn VOL knob to adjust
the level of each sub-features.
AUTO CONNECT: If you don’t want to auto
connect to last paired phone, just set Auto
Connect to OFF. It will default at ON.
DEVICE NAME: R4500. Select correct Device
Name when you search for Bluetooth connection on your phone.
2-4. About
Press SEL knob at ABOUT being highlighted, it will
show the firmware information of the product.
With firmware information being displayed, press
and hold the VOL knob for more than 5 seconds
to display Factory Reset. Press SEL knob to
confirm, the unit will be initialized and restarted.
Note: Once Factory Reset is carried out, prior
presets will be cleared, and you will need to setup
the features and Global Presets once again.
System Info
MPEG:
MCU:
Factory Reset!
X
BLUETOOTH SETTINGS
AUTO CONNECT
DEVICE NAME
OFF
ON
General Operation (SETUP)
8
1. To Select Bluetooth mode
Press RETURN button to display Home Menu, then turn VOL knob and press it to
select USB mode. (
Or repeat press SRC button to select the desired mode.
2. USB Screen Description
3. Play / Pause
The foreground pop up icon refers to the source changing.)
While USB is playing, press the PAUSE button to pause the playback, and press again to
resume playback.
Note: refers to PAUSE; refers to PLAY.
4. Track Up/Down
While USB is playing, press the TUNE Up/Down button to select the next or previous track.
To fast forward or rewind, press and hold TUNE Up/Down button.
ID3 tag:
Song Title
Album
Artist
Play/Pause
Album Artist
Play Status:
Repeat
Random
Introl
USB Section Operation
13