Users Manual

Wire Configuration
12P CONNECTOR
(REM)
( ACC )
( GROUND )
( REAR CAMERA DET )
( ILL )
FUSE
BLUE
PINK
ORANGE
RED
BLACK
GRAY
GRAY/BLACK
VIOLET
VIOLET/BLACK
(FRONT RIGHT )
( REAR RIGHT )
GREEN
GREEN/BLACK
WHITE
WHITE/BLACK
( FRONT LEFT )
( REAR LEFT )
(USB)
(AUX)
(ANT JACK)
(REAR LINE OUT)
(SUBWOOFER)
(REAR CAMERA)
6P REMOTE
CONTROL
(FRONT LINE OUT)
NOTE:
1. When wiring, the red lead is recommended to be wired to ACC/ignition power lead.
2. Make sure that the black wire on the wiring harness is connected to a good ground point
on the boat. If the chassis of the boat is used as a ground point, make sure that the surface
is scraped clean of paint before attaching the wire to it. It is recommended to connect the
black ground wire directly to negative terminal (-) of the boat battery.
3. Before wiring your system, disconnect your boat battery’s positive (+) cable. This helps
prevent damage in case of a short.
4
RED
WHITE
RED
WHITE
RED
WHITE
RED
WHITE
13
USB Section Operation
1. To Select USB mode
2. USB Screen Description
3. Play/Pause Play
While USB is playing, press the PAUSE button to pause the playback, and press
again to resume playback.
At Home Screen, turn VOL knob and press it to select USB source. (The foreground pop up
icon refers to the source changing.)
Or repeat press SRC button to select the desired source.
Note: This input is designed to read and play USB drives (mp3 and wma files), not media.
Only displays when EQ / LOUD ON
was selected in the Settings.
SCAN: Intro Scan play (Track / Scan play)
RPT: Repeat play (Track / Repeat play)
RDM: Random play (Track / Random play)
Play mode
Note: refers to PLAY; refers to PAUSE.
Play/Pause
Track elapse time
Id3 tag:
Song
Artist
Album
Title
Track No./Folder No.
15A