Users Manual

对折基准 线
对折基准 线
8
1-8. I-Volume Control
In Settings screen, turn VOL knob and press the knob when it highlights at I-Volume. Then
turn the knob to adjust I-VOL from 0 to 40. Press the knob again to exit I-Volume control.
Note: The I-Volume determines the volume level when the unit is powered on.
With Rear Camera connected, once triggered, it will
change to Camera display. You can select Camera
OFF in Settings.
In Settings screen, turn VOL knob and press the knob
when it highlights at Camera. Then turn the knob to
select Camera ON or OFF. Press the knob again to
exit Camera control.
Note: We recommend a camera that has brightness
and contrast built in for best results.
1-10. BT I-Volume Control
In Settings screen, turn VOL knob and press the knob when it highlights at BT-Volume.
Then turn the knob to adjust BT Volume from 0 to 40. Press the knob again to exit
BT-Volume control.
Note: The BT-Volume determines the volume level of BT Music playing when powered on.
2. Audio Settings
In any source playing status, press SEL button to enter Audio Settings. Then repeat press the
knob to display as following sequence:
BAS --> MID --> TRE --> BAL --> FAD --> EQ --> LOUD --> BEEP.
At each setting, turn the knob to adjust the level. The waiting time for adjustment is 5s.
- BAS. Turn VOL knob to adjust Bass level from -7 to +7.
- MID. Turn VOL knob to adjust Middle level from -7 to +7.
- TRE. Turn VOL knob to adjust Treble level from -7 to +7.
- BAL. Turn VOL knob to adjust Balance level from L12 to R12.
- FAD. Turn VOL knob to adjust Fader level from F12 to R12.
- EQ. Choose among Flat, Classic, Pop, Rock or OFF.
- LOUD. Choose between Loud ON or OFF.
- Beep. Choose among Beep 2ND, Beep OFF or Beep ON.
1-9. Rear Camera Control
General Settings
Audio Settings
7
0
0
7
15
FM
BAS
+05
9
Radio Section Operation
1. To Select Radio mode
At Home Screen, turn VOL knob and press it to select AM, FM or WB source.
(
Or repeat press SRC button to select the desired source.
2. Radio Screen Description
The foreground pop up icon refers to the source changing.)
Only shows when
the station is a
Stereo Channel.
Displays EUR, USA or JAPAN to indicate
the Area selected in the Settings.
Displays FM, AM,WB.
Frequency Mark
Only displays when EQ / LOUD
ON was selected in the Settings.
Only displays when the station
is a preset station
P1
Camera
ON
10
BT Volume
40
Refers MANU or
AUTO tune status.