User Manual BLE Sensor Brand: PROSPACE Model:Sensor 2.0 BLE Mmanufacturer PROSPACE PTE. LTD.
Sensors Sensor front All front of the sensor will have a label. For Example, L31-M6-8 in the picture(Sensor front). L31 is equal to Floor 31, M6 is equal to Meeting Room 6 and “8” is equal to the seat number Sensor Back All Sensor back have 3M double sided tape for pasting under the table All Sensor need to have at least one 4V button batteries in order to work properlu Sensor Label = Each Sensor have an unique number. This number is recorded in our system to process the seat utilization.
Every BLE Sensor need to be place at every seat correctly. According to the label of the sensor. 25cm The Recommended distance of the sensor pointing toward the seats is 25cm.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
