How to Guide

STEP 1
Pull the handle of the pump
to remove the ination
needle from the pump.
WRONG WAY RIGHT WAY
STEP 1
Pull the handle of the pump
to remove the ination
needle from the pump.
STEP 4
Carefully insert the needle at a slight angle into the valve with a slight twisting motion.
Make sure the needle is pushed all the way in. Inate to the desired level. Maximum
recommended ination height is 5 inches. Do not overinate.
STEP 2
Screw the needle into the
end of the pump. Moisten
the needle before inserting
it into the disc valve.
STEP 2
Insert the needle at slight
angle into the valve with a
slight twisting motion.
STEP 3
Locate the air valve on the
Core Balance Disc.
STEP 3
Squeeze the disc until
the desired air amount is
remvoed from the disc.
INFLATION INSTRUCTIONS
DEFLATION INSTRUCTIONS