How to Guide

STEP 1
Remove packaging material.
Unscrew bolts and washers.
STEP 5
Insert safety connector into both rear feet
and choose your desired length which
suits you best.
STEP 3
Make sure the front and rear feet are
parallel to each other. Then make sure to
tighten up the bolts with washers using the
Allen wrench provided.
STEP 2
Slide the front and rear feet
into the U-Bar.
STEP 6
Then screw in the adjustment
knobs and secure it.
STEP 4
Repeat Steps 1, 2, and 3 for the
other U-Bar.