User Manual

ASSEMBLY INSTRUCTIONS
STEP 1 - Release Section A
Expand section A by holding the top of the pole (not the tip) with your left hand
as you twist it away from you, allowing the pole to be loose and fully adjustable.
STOP! Do not expand the bars beyond the “STOP” indicator on the bar.
STEP 2 - Tighten Section A
Secure the desired length of section A
by twisting it towards you while your
right hand is holding section B.
STEP 4 - Tighten Section B
Secure the desired length of section B by twisting it towards you while your right
hand is holding section C. This will lock in the pole at the preferred height of
choice while remaining full adjustable. DO NOT expand beyond “STOP” indicator
STEP 3 - Release Section B
Expand section B by twisting the connec-
tor away from you. It should now be loose
and fully adjustable.
CORRECT
CORRECT
INCORRECT
INCORRECT