System information

Digital Video Recorder

point into the system.

 Load preset location of the dome

Press the [Menu] button to enter system menu; select “Serial Device” and “Set Preset Point” in order and

input the number of a preset point saved in the system (00 to 63) in the “Preset Point Number” dialog box and

then select “Load” and press the [Menu] button again and the system will control the dome to move to the

preset location.

5.8 Preview setting

Enter “Preview Setting” menu as the above picture; firstly set the interval time of the preview, which is 5

seconds by default. User can set the time according to actual needs. The max time interval is 99 seconds. In the

“Preview Rules”, Single Screen and Full Screen options are available. Then press the Ok button the preview

will be enabled according to the set interval time.

5.9 User management