User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page59of208
February5,2015

ChecktheEthernetCable
Iftheradio’sEthernetport isconnectedandtheEthernetLEDdoesnotlightonthe
radio,theremaybeaproblemwiththeEthernetcable.Verifythecableispluggedinto
theradioatoneend,andtoanEthernethubora10/100/1000Base‐TEthernetswitch
attheothere
nd.
IfusingthePoEinjector,verifythattheM12toRJ45cableisconnectedbetweenthe
radioandtheinjectorandalsothattheEthernetpatchcableisconnectedbetweenthe
injectorandswitch.
Note: The RLX2 radio auto-detects the Ethernet connection type, and does not require a crossover
cable for direct connection to a PC.