User's Manual

RLX2 Industrial Hotspot Series

Page46of208 ProSoftTechnology,Inc.
 February5,2015

 Considerdrawingupthenetworkplansonpaper.Aspartofthedrawing,assigna
logicalnametoeachradio.ThesenamescanbeassignedintheRadioConfiguration
/DiagnosticUtility.
 Aspartoftheplanning,asitesurveymaybehelpful.YoucanhireProSoft
Tech
nologyorasurveyortoperformasurvey,oryoucanconductthesurveyon
yourown.
 Protectradiosfromdirectexposuretoweather,andprovideanadequate,stable
powersource.Makesuretheplancomplieswiththeradio’spowerrequirements
andcablespecifications.

Important: Radios and antennas must be located at least 8 inches (20 cm) away from personnel.