User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page43of208
February5,2015


ClickApplyChanges.Whentheradioreboots,theIHBrowserwilldisplay:

2. PowerofftheClientradioanddisconnecttheEthernetcablefromtheconfiguration
PC.
3. ConnecttheEthernetcabletoanEthernetportonanotherPC,andpowerupthe
Clientradio.(Theradiomu
stbepoweredupafterattachingtheEthernetcableto
thenewPCsotheradiowillregistertheMACaddressofthePCsnetworkinterface.)
EnsuretheIPaddressoftheEthernetinterfaceonthePCisonthesamesubnetas
thenetworkoftheClientRadio.Forthi
sexample,settheIPaddressofthePC
interfaceto192.168.1.100.HereisanexampleofdoingsoinWindows7:
