User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page183of208
February5,2015

Theantennapatternisabeampointedawayfromtheconcavesideofthedish.
Beamwidthandantennagainvarywiththesizeofthereflectorandtheantenna
construction.Typicalgainvaluesare15to30dBi.
Theantennapolaritydependsonthefeedantennapolarization.



RLX2ApprovedAntennas
IntheU.S.andCanada,useantennasthatarespecificallyapprovedbytheU.S.Federal
CommunicationsCommission(FCC)andIndustryCanadaforusewiththeRLX2radios.
ContactProSoftTechnologyorvisitwww.prosoft‐technology.comforacurrentlistof
approvedantennas.
 Whip
 Collineararray
 Yagiarray
 Parabolicreflector
Antennasele
ctiondependsonwhetherthebi‐directionalamplifierisbeingusedornot.
Foreachapprovedantenna,thereisaspecifiedminimumdistan cetheantennasmust
beseparatedfromusersforsafeexposurelimits,accordingtoFCCpart2.1091.
ApprovedantennasinEuropeandothercountriesacceptingCE
Approvedan
tennasinMexico