User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page115of208
February5,2015

SNMPAgentSettings

SNMPisanetworkmanagementprotocolthatisoftenusedwithTCP/IPandEthernet.
AsanalternativetousingtheRadioConfiguration/DiagnosticUtility,changingradio
settingsandviewingdiagnosticscanbedoneinanSNMPmanagerapplication.
Field
Description
Enable
EnablesthefollowingSNMPAgentsettings.
AllowAnyManager
AllowsanyusertochangetheradiosettingsfromanycomputerusingSNMP.
AllowIP
RestrictsaccesstoanSNMPmanagerwithaparticularIPaddress.Enterthe
IPaddressintheAllowIPfield.
CommunityString
Entera"communitystring"(essentiallyapassword)thatamanagermustuse
toaccesstheradio’sSNMPagent.
Permission
Selectthepermissionleveltoassigntothisradio.
Readonly
AnSNMPAgentcanviewbutcannotmodifyradiosettings.
Read/Write
AnSNMPAgentcanviewandmodifyradiosettings.
Save
Savesthechangesandupdatestheradioconfiguration.
Cancel
Discardsthechangeswithoutupdatingtheradioconfiguration.

TheRLX2SNMPagentsupportsSNMPprotocolversion1.4and2MIBs:
 RFC12133‐MIB(partial;internet.mgmt.MIB‐2.system,.interfaces,.snmp)
 ROMAP‐MIB(includedontheDVD;internet.private.enterprises.romap) 
ItalsosupportsaselectionofstandardSNMPtraps,includingColdStart,whichissent
whentheradioinitializes.