User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page111of208
February5,2015

Note: Clients often support more than one WEP key. Packets received can be decrypted using any
one of the keys if programmed, but packets are always transmitted with the "default" WEP key
number. If a transmit key number is set on the RLX2 radio, make sure all other radios and clients
have this key programmed. To set keys other than key 1 on some clients using Windows,
Advanced settings may be used.

ProgrammingmorethanonekeyontheRLX2radiorequiressettingthekeynumberto
thekey,enteringthekey,andsavingthechanges.Repeatthesestepsforeachkeyto
program,savingaftereachone.Finally,changetothedesiredtransmitkeynumberif
necessaryandsaveagain(If"****"re
mainsinthekeyfield,thepreviouslyprogrammed
keywillnotbechangedwhenchangesareapplied)