User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page101of208
February5,2015

 GiventhatthecurrentRLX2onlyhasoneradiomodule,allMasters,by
necessity,havetobeonthesameChanneltoallowtheroamingRepeaterto
detectthem.
 Inapplicationswherethemobileplatformistravellingaknownpath,itis
necessarytohaveanu
nambiguousoptionwhenitreachesaroampoint.If
multipleParentsareinrangeattheroampoint,itmaydecidetoroamtothe
wrongParent.
 TheRepeater’sRoamThresholdandParentMarginsettingsareusedforevery
roam.Duetotopologyvariances,theremaybeoneortwocover
ageareasthat
wouldoperatebetterwithdifferentsettings fortheseroamparameters.
Thefollowingsettingsallow forParentAssistedroamingbyadve rtisingtheseparameter
valuestoanyChildRepeaterthatassociatestothisunit.Eachparametercanbe
enabledseparatelyusingacheckbox.OnlyenabledparametersareadvertisedtoChild
Repea
ters.
