User manual

RLXIC-SV ♦ Intelligent Cellular Universal Serial Bus (USB)
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network User Manual
Page 56 of 146 ProSoft Technology, Inc.
May 29, 2009
6.3 Changing the USB port communication
The command to change the port configuration is *USBDEVICE, and it is in the
USB group of AceManager.
By default, the port is set to work as a virtual Ethernet port (*USBDEVICE=1).
To change the USB port to allow virtual serial port communication, disable the
Ethernet port emulation, set *USBDEVICE to 0.
Note: If you use a terminal connection with the USB port to change *USBDEVICE, the change is
immediate. Your connection will be terminated after inputting the command.
6.4 Using the Virtual Serial Port
After the driver is installed, you can use the USB port just like a standard serial
port.
6.4.1 Using the USB virtual serial port with AceManager
In AceManager, the USB virtual serial port connection will appear as a standard
serial port. Use the PPP connection, and select the COM# serial port of the USB
connection.
Tip: You will need to open AceManager after you connect the USB cable to your computer for
AceManager to have access to the USB Serial PORT.