User manual

Universal Serial Bus (USB) RLXIC-SV ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc. Page 55 of 146
May 29, 2009
6.2 Using the Virtual Ethernet Port
After the driver is installed, you can use the USB port just like a standard
Ethernet port.
6.2.1 Using USB Ethernet with AceManager
In AceManager, use the UDP or TCP connection, and enter the IP address of the
modem (
192.168.13.31 by default), and the password (12345 by default).
6.2.2 Using USB Ethernet with a Terminal Emulation Utility
Configure your terminal application for telnet communication.
1 In HyperTerminal, select TCP/IP (Winsock)
2 Use the IP address of the modem (
192.168.13.31 by default) as the
destination, and use the telnet port of the modem (
2332 by default).
3 Enter the modem password (
12345 by default) when requested.