User manual

RLXIC-SV ♦ Intelligent Cellular Activating your RLXIC-SV on your cellular provider
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network User Manual
Page 22 of 146 ProSoft Technology, Inc.
May 29, 2009
Note: The process may take a few minutes. Progress information will display across the bottom.
Tip: If you have low signal, you may encounter difficulties activating your modem. Try a different
location or a different antenna to increase your signal if it is -90 or lower (yellow to red bar).
3.1.6 Test Modem Setup
Your connection of your RLXIC-SV to the Internet is tested using the your cellular
provider cellular network.
Green checks in the boxes indicate the tests were successful and your RLXIC-
SV is functioning properly. At this point your modem is configured and activated
to work on the your cellular provider network.
Note: These tests, depending on the strength of your signal, may take a few minutes. Initially,
while the tests are being performed, there may be red Xs in the boxes. The Status line will give an
indication of the progress of the connection process.
If Test Modem Settings shows the status of your modem is "Data Connection
Failed - Waiting for Retry", "No Service", "No Carrier", "Network Negotiation
Failed", "Network Authentication Failed", "Modem Not Registered", or the Reg
Net light on the modem is not lit, double-check your device activation information
and return to the Activate Modem step to reconfigure your RLXIC-SV.