User manual

Activating your RLXIC-SV on your cellular provider RLXIC-SV ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc. Page 21 of 146
May 29, 2009
Tip: You can download current ALEOS firmware from the ProSoft Technology website, and install
it separately.
Click NEXT when you are finished updating or if you choose not to update.
3.1.5 Activate Modem
The steps and data required to activate your RLXIC-SV on the your cellular
provider network varies depending on the model. The Wizard is designed to
support older models as well as those currently shipping
To configure or provision your modem to work on the your cellular provider
network, you will need device activation information provided by your cellular
provider.
Fill in the requested information and click N
EXT on each screen.
 MSL - Master Subsidy Lock or Activation Code to unlock the internal
hardware of your RLXIC-SV. This code is provided by your cellular provider.
 MDN - The phone number of your cellular account.
 MIN or MSID - The identification number for your cellular account.
Caution: Your MDN and MIN or MSID may be different. You need to enter both numbers for
activation to succeed.
 Static IP - If you have a cellular account with a static IP address, check this
box if it is displayed.
Caution: If you do not have a static IP account and check the Static IP box, you may not be able to
activate your RLXIC-SV or register on the your cellular provider network.
The Wizard will check the signal strength of your RLXIC-SV (RSSI). Click Next to
begin the activation process.