User manual

RLXIC-SV ♦ Intelligent Cellular Configuration Commands
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network User Manual
Page 132 of 146 ProSoft Technology, Inc.
May 29, 2009
MLISTid=d.d.d.d
Enters an ID and IP address into the Modbus List. ID is a decimal value (1 to
100).
 id=ID
 d.d.d.d=IP address or name
MLISTXhexid=d.d.d.d
Enters an ID and IP address into the Modbus List. ID is a hexadecimal value (0
to 64).
 hexid=ID
 d.d.d.d=IP address or name
11.6 1x/EV-DO
This group includes commands specific to 1x and EV-DO.
+CTA=n
Inactivity timer, in seconds. Typical network settings cause a link to go dormant
after 10 to 20 seconds of inactivity, no packets transmitted or received. This time
can be shortened to release the physical RF link sooner when the application
only transmits short bursts.
 n=0 : Allows the cellular network to determine the inactivity timer.
 n= seconds (maximum 20 seconds)
$QCMIP=n
Mobile IP (MIP) Preferences. On a Mobile IP network, a device connects to the
network using PPP. During the negotiation process the RLXIC-SV is NOT
required to present a username and password to authenticate because the
authentication parameters are stored in the modem itself.