User manual

RLXIC-SV ♦ Intelligent Cellular Configuration Commands
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network User Manual
Page 128 of 146 ProSoft Technology, Inc.
May 29, 2009
11.3.12 Port Forwarding
Any data coming in on the defined Public Port will be passed to the
corresponding Private Port connected to the physical interface specified and
using the host IP address.
Note: This feature can be used only in private mode.
Note: There are no AT commands for Port Forwarding parameters, they need to be configured
using AceManager.
Number of PF Entries = n
Set value to number of used Port forward rules for performance gain. Each
forwarding entry has four parameters.
 n = 1-5
Public Port = n
Port number of the Modem/Gateway.
 n = 8090
Host/IF = n
Physical connection type to the modem. (USB, Ethernet, Serial).