User manual

RLXIC-SV ♦ Intelligent Cellular Configuration Commands
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network User Manual
Page 124 of 146 ProSoft Technology, Inc.
May 29, 2009
*MSCIUPDADDR=name[/port]
Modem Status Update Address - where Name/Port is the domain name and port
of the machine where the modem status updates will be sent. The status
parameters of the RLXIC-SV are sent in an XML format.
 name=domain name
 port=port
*MSCIUPDPERIOD=n
Modem Status Update Period - where n defines the update period in seconds.
 n=0 : Disabled.
 n=1-255 seconds
*NETWDOG=n
Network connection watchdog: The number of minutes to wait for a network
connection. If no connection is established within the set number of minutes, the
RLXIC-SV modem resets.
 n=0 : Disabled.
 n=minutes : Default = 120 min.
*RESETCFG
Wipe the non-volatile data in the modem. Cannot be used with AceManager.
Caution: You may need to reactivate your modem if you erase the non-volatile data.
*SNMPCOMMUNITY=string
The SNMP Community String acts like a password to limit access to the
modem's SNMP data.
 string =string of no more than 20 characters (default = public).
*SNMPPORT=n
This controls which port the SNMP Agent listens on.
 n=0 : SNMP is disabled.
 n=1-65535
*SNMPSECLVL=n
Selects the security level requirements for SNMP communications.
 n=0 : No security required. SNMPv2c and SNMPv3 communications are
allowed.
 n=1 : Authentication equivalent to "authNoPriv" setting in SNMPv3. SNMPv3
is required to do authentication, SNMPv2c transmissions will be silently
discarded.