User manual

Configuration Commands RLXIC-SV ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc. Page 101 of 146
May 29, 2009
*HOSTMODE?
The current host mode (AT, PPP, UDP, etc.). If the RLXIC-SV is not in AT mode,
telnet into the modem to execute this command.
*POWERIN?
The voltage input to the internal hardware.
*BOARDTEMP?
The temperature, in Celsius, of the internal hardware.
+HWTEMP?
Displays the internal temperature of the radio module in degrees Celsius.
11.2.1 Information Displayed in AceManager without AT Commands
Listed
 Bytes and Packets Received and Sent: Network traffic for the applicable
port.
 Number of System Resets: Counter of the number of system resets over
the life of the modem or since the configuration was reset.
 Bad Password Count: Counter of the number of bad password attempts.
 IP Reject Count or Log: Rejected IP Data.
 Temperature of the Internal Hardware Module: The temperature of the
internal radio module.
11.2.2 AT Commands Requiring PassThru mode
These commands are not displayed in AceManager.
+GSN
ESN (Electronic Serial Number) of the internal hardware module.