User manual

Universal Serial Bus (USB) RLXIC-SG ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM
ProSoft Technology, Inc. Page 49 of 136
May 29, 2009
6.3 Using the Virtual Ethernet Port
After the driver is installed, you can use the USB port just like a standard
Ethernet port.
6.3.1 Using USB Ethernet with AceManager
In AceManager, use the UDP or TCP connection, and enter the IP address of the
modem (
192.168.13.31 by default), and the password (12345 by default).
6.3.2 Using USB Ethernet with a Terminal Emulation Utility
Configure your terminal application for telnet communication.
1 In HyperTerminal, select TCP/IP (Winsock)
2 Use the IP address of the modem (
192.168.13.31 by default) as the
destination, and use the telnet port of the modem (
2332 by default).
3 Enter the modem password (
12345 by default) when requested.