User manual

Configuring your RLXIC-SG RLXIC-SG ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM
ProSoft Technology, Inc. Page 39 of 136
May 29, 2009
 Optional parameters are denoted with square brackets [ ].
 AT Commands are not case sensitive. A capital "E" is the same as a lower-
case "e".
 When you are using a terminal connection, if you enter a command which is
recognized by the RLXIC-SG, it will respond with "OK". If the command is not
recognized, the response will be "ERROR".
 Those commands applicable only to certain model numbers of the RLXIC-SG
will be noted.
Caution: Symbols listed with commands, such as *, /, &, or ?, are part of the command and must
be included. Commands with symbols other than * may require PassThru mode.