User manual

Configuring your RLXIC-SG RLXIC-SG ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM
ProSoft Technology, Inc. Page 37 of 136
May 29, 2009
Note: You can also connect using the virtual USB serial port. Refer to Using the USB virtual serial
port with a Terminal Emulation Utility (page 50) for more information on configuring and using the
virtual serial port.
2 Type in 192.169.13.31 for Host Address.
3 Change the "Port Number" to
2332.
4 Click OK.
Port Settings (serial only)
1 Change or verify the settings:
o Bits per Second: 115200 (default)
o Data Bits: 8
o Parity: None
o Stop Bits: 1
o Flow Control: Hardware.