User manual

RLXIC-SG ♦ Intelligent Cellular Configuration Commands
RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM User Manual
Page 114 of 136 ProSoft Technology, Inc.
May 29, 2009
11.3.10 Other
DAE=n
AT Escape Sequence detection.
 n=0 : Enable
 n=1 : Disable
*DATZ=n
Enables or disables reset on ATZ.
 n=0 : Normal Reset (Default).
 n=1 : Disable Reset on ATZ.
*IPPING=n
Set the period to ping (if no valid packets have been received) a specified
address (*IPPINGADDR) to keep the modem alive (online).
 n=0 : Disable pinging (default)
 n=15-255 minutes
Note: 15 minutes is the minimum interval which can be set for Keepalive. If you set *IPPING for a
value between 0 and 15, the minimum value of 15 will be set.
*IPPINGADDR=[d.d.d.d][name]
Set the IP address or valid internet domain name for the RLXIC-SG to ping to
keep itself alive (online). *IPPING must to be set to a value other than 0 to enable
pinging.
 d.d.d.d=IP address
 name=domain name