User manual

RLXIC-EV ♦ Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 92 of 104 ProSoft Technology, Inc.
March 10, 2010
5.15 Updating RLXIC-EV firmware
For installing the latest firmware version (.exe file), you can go to the ProSoft
Technology website: www.prosoft-technology.com. For the updater tool to
execute, please install the USB drivers available on the website before executing
the .exe file.
Tip: Copy the USB Serial Driver.inf file to your desktop. Then power up the RLXIC-EV and connect
USB. Install from specific location and point to this .inf file. For detailed instructions on installing the
USB drivers, please refer to Universal Serial Bus Application Note.
1 Connect the RLXIC-EV to your computer using an Ethernet cable or a USB
cable.
2 Connect the power adapter and antennas to your RLXIC-EV.
3 A ProSoft Technology firmware update welcome screen appears. Click on
Next.
4 Choose the interface you want to program the modem through and click on
Next.
The default private for Ethernet is also in a different subnet from the other
connection types.
Interface RLXIC-EV Connected Device
Ethernet Private default 192.168.13.31* 192.168.13.100
USB/NET 192.168.14.31 192.168.14.100
DUN 192.168.15.31 192.168.15.100