User manual

Configuring your RLXIC-EV RLXIC-EV Intelligent Cellular
User Manual RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon
ProSoft Technology, Inc. Page 91 of 104
March 10, 2010
3 Browse and Select the template you have saved (you may need to change
folders if you saved it to a different location).
4 Click on Upload File to device.
5 Click on Load Template.
Tip: After you load the template, it is best to go back over the ACEmanager tabs to make sure all
the settings are what you require.
6 Click the Apply button on the toolbar to write the configuration to the device.
7 Click on OK.
8 Click on the Reboot tab to reset the device.
Caution: Many of the configuration settings will not take effect until the device has been reset.
Tip: You can use common settings on one device to configure those same settings on another
device even of a different type. For example, you can use the serial settings of one device (such as
RLXIC-SV) to configure the serial settings of a RLXIC-EV. Settings not applicable to the device on
which you are loading the template, will be discarded.