User manual

RLXIC-EV ♦ Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 86 of 104 ProSoft Technology, Inc.
March 10, 2010
5.12.1 Current State
The current state screen will show the current values for the available inputs as
well as the current values for pulse counts (digital) and transformed analog. The
current state of the Relay or Digital Output is displayed and can be changed
directly.
Field AT Command Description
Digital IN # *DIGITALIN1
*DIGITALIN2
Query individual digital inputs. The digital inputs report
either a 0 (open) or 1 (closed).
 n=1-4 Input number
Relay Output # *RELAYOUT1
*RELAYOUT2
Set or query the relay outputs.
 n=1-2 Input number
 s=OPEN or CLOSED
5.12.2 Configuration
To enhance the usability of the I/O, the configuration will allow you to set an initial
value for the output relays and a coefficient, offset, and unit label for the analog
in.
Field AT Command Description
Relay # Initial
Setting
When the RLXIC-EV reboots, the relay settings you want
can be configured here.
Relay setting can be:
 ON
 OFF
 Last Value