User manual

RLXIC-EV ♦ Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 80 of 104 ProSoft Technology, Inc.
March 10, 2010
Field AT Command Description
SNMP Trap
Destination
*SNMPTRAPDEST
Controls destination for SNMP Trap messages. If port is 0
or host is empty, traps are disabled. Traps are sent out
according to the SNMP security level (i.e. if the security
level is 2, traps will be authenticated and encrypted).
Currently, the only trap that can be generated is linkup.
 host = IP address
 port = TCP port
SNMP
community
String
*SNMPCOMMUNITY
The SNMP Community String acts like a password to limit
access to the device's SNMP data.
 string = string of no more than 20 characters (default
= public).
SNMP Contact
This is a personal identifier of the contact person you
want to address queries to. This is a customer defined
field.
SNMP Name
This is the name of the device you want to refer to. This is
a customer defined field.
SNMP Location
Location of where your device is stored. This is a
customer defined field.
5.10.8 Time (SNTP)
The device can be configured to synchronize its internal clock with a time server
on the Internet using the Simple Network Time Protocol.
Field AT Command Description
Enable Time
Update
*SNTP Enables daily SNTP update of the system time.
 n=0: Off
 n=1: On
SNTP Server
Address
*SNTPADDR
SNTP Server IP address, or fully qualified domain name, to
use if *SNTP=1. If blank, time.nist.gov is used.
 d.d.d.d=IP address
 name=domain name