User manual

Configuring your RLXIC-EV RLXIC-EV ♦ Intelligent Cellular
User Manual RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon
ProSoft Technology, Inc. Page 65 of 104
March 10, 2010
Example of configuring a port forward rule for port forwarding range of 5 ports on
an Ethernet connected device:
1 Set number of PF entries to 1.
2 Click on "Add More" to display a rule line.
3 Enter 8080 for the public start port.
4 Enter 8085 for the public end port.
5 Select Ethernet as the Host I/F.
6 Enter 192.168.13.100 as the Host IP.
7 Enter 80 as the private port.
An unsolicited data request coming in to the RLXIC-EV on port 8080, will be
forwarded to the LAN connected device, 192.168.13.100, at port 80. In addition,
an unsolicited data request coming in from the internet on port 8081, 8082, 8083,
8084, and 8085 will be forwarded to 81, 82, 83, 84, and 85 respectively.
Example of configuring the DMZ on an Ethernet connected device:
1 Enter 192.168.13.100 for the DMZ IP.
2 Select Ethernet as the Default Interface.
An unsolicited data request coming in to the RLXIC-EV on any port, will be
forwarded to the LAN connected device, 192.168.13.100, at the same port.
Note: The DMZ settings are independent of the number of Port Forward entries and can be used
with port forwarding to pass anything not forwarded to specific ports.