User manual

RLXIC-EV ♦ Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 62 of 104 ProSoft Technology, Inc.
March 10, 2010
Field AT Command Description
Remote Address
Type
Remote Address
Remote Address
– Netmask
The default configuration is 0.0.0.0/0, which will direct all
traffic over the GRE tunnel.
Keep Tunnel
Alive
5.8.4 Log
The VPN log can be used for troubleshooting purposes when setting up the
IPSec and/or GRE configuration. The Log page will allow you to establish the
tunnel connection and monitor the results directly. To change the intervals at
which the log is displayed, you can change the settings in Auto Refresh.
Following are few main action tabs on the log page:
 Connect - indicates connecting to the tunnel.
 Refresh - is the option to refresh the page manually.
 Clear - clicking on Clear will clear out the tunnels.
 Apply Policy - will establish tunnel specification.