User manual

Configuring your RLXIC-EV RLXIC-EV ♦ Intelligent Cellular
User Manual RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon
ProSoft Technology, Inc. Page 55 of 104
March 10, 2010
Configure your RLXIC-EV to support PPPoE
1 From the groups on the left, select PPPoE under LAN.
2 Change Host Authentication Mode to 2.
3 Enter a user name for PPP User ID for the PPPoE connection.
4 Enter a password (PPP password) for the PPPoE to connection.
Tip: If you leave PPP User ID and PPP password blank, any computer or device can connect to
the RLXIC-EV device using PPPoE.
Note: ACEmanager shows the existing values for PPP User ID and PPP password encrypted and
character padded.
Optional: Configure *Device Name
1 In ACEmanager, select Dynamic DNS from the groups on the left, under
Services.
2 Enter a name for device Name, such as RLXIC-EV or the ESN.
The name you choose for device Name will not affect the connection but may
need to be configured in PPPoE settings for the router, device, or computer you
will be connecting to your RLXIC-EV.