User manual

Configuring your RLXIC-EV RLXIC-EV ♦ Intelligent Cellular
User Manual RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon
ProSoft Technology, Inc. Page 47 of 104
March 10, 2010
5.6.2 Advanced
Field AT Command Description
Respond to
Incoming Ping
Network
Authentication
Mode
*CLIENT_PPP_AUTH
Specifies the authentication method to be used in the
network PPP session.
 PAP and CHAP are two options.
Network User ID *NETUID Network User ID
The login that is used to login to the cellular network,
when required.
 uid=user id (up to 64 bytes)
Network
Password
*NETPW Network Password.
The password that is used to login to the cellular
network, when required.
pw=password (30 characters maximum).
Check profile 1
Params
Enables checking and updating the Profile 1
Parameters.
NAI Sets the Network Access ID.
PHA Sets the IP address of the primary home agent.
SHA Sets the IP address of the secondary home agent.
MHSS Sets the home agent shared secret key.
MASS Sets the AAA shared secret key.
Network Watch
Dog
*NETWDOG
Network connection watchdog: The number of minutes
to wait for a network connection. If no connection is
established within the set number of minutes, the device
resets.
 n=0: Disabled.
 n=minutes: Default = 120 min.